Juancho E. Yrausquin Airport (TNCS)

Description

TNCS is located on the Dutch Caribbean Island of Saba. Airport Characteristics Lat/Long: 17.6450 N / 63.2200 W Elevation: 60 meters Saba Island, Netherlands Antilles Max Runway: 396 meters (1300 feet). Most Jets will not attempt a normal landing at this airport, but with excellent flying conditions / piloting techniques and reverse thrusters it is possible in an emergency. There is absolutely no overrun on either end past the pavement - a 200 foot drop straight down to the water. Make sure you land and takeoff into the wind. Routine traffic are BN-2 and DHC-6 Twin Otters and other STOL airplanes. This little airport belongs on the bucket list of any pilot - real or simulated. With less than 1000 feet of usable runway, Saba's runway is the shortest commercial runway in the world. The local aviation authority requires a special permit to land here. The local commuter WinAir has permanent approval for their Islander BN-2 and -6 Twin Otters. The above description has been prepared by IPACS forum user JetJockey10. Although this website is moderated as far as is possible, the text above does not represent the views of the administrator of FSCloudPort. If you have any concerns about the above content please email admin@

Runways

12 / 30303m x 20mModel size:494m26m

Author

IPACS Forum ID JetJockey10
Contributors
Created on 12/03/2019 20:09:54 GMT
Updates more23-Mar-2018 20:15:27 By JetJockey10 +10 buildings +3 static aircraft

Download Section

FOR PERSONAL USE ONLY. CONTACT [email protected] FOR COMMERCIAL USE

Download instructions for a fully modelled airport follow Click for basic TSC

  1. Create folder My PC > Documents > Aerofly FS2 > scenery > places > NL
  2. Download TNCS.zip file to your NL folder and unzip to folder TNCS/
  3. Download xref_lib_water_towers.zip to My PC > Documents > Aerofly FS2 > scenery > xref and unzip to folder xref_lib_water_towers/ (only do this once and it applies for all FSCP airports
  4. Go Fly!
Back to