Colonsay Airport (EGEY)

Description

Colonsay Airport (IATA: CSA, ICAO: EGEY) is located on the island of Colonsay, Argyll and Bute, Scotland. Located 3 nautical miles (5.6 km; 3.5 mi) west of Scalasaig, it is a small airport, with two 25-minute flights every Tuesday and Thursday to Oban Airport by Hebridean Air Services. Scheduled services commenced in 2006 after the grass airfield was upgraded with a paved runway. (see Wikipedia)

Navigation-Informations:

  • The navigation charts (aerodrom, IFR and VFR) can be downloaded from this site:
    • NATS — AERONAUTICAL INFORMATION SERVICE
    • click on "eAIP AIRAC MM/JJJJ"
    • click on "+ AD 2 AERODROMES" (left sidebar)
    • click on "+ EGPY COLONSAY" (left sidebar)
    • click on "AD 2.24 EGPY CHARTS RELATED TO AN AERODROME" (left sidebar)
    • click on e.g. "AD 2.EGPY-2-1" (AERODROME CHART)
The above description has been prepared by IPACS forum user ApfelFlieger. Although this website is moderated as far as is possible, the text above does not represent the views of the administrator of FSCloudPort. If you have any concerns about the above content please email admin@

Runways

10 / 28501m x 18mModel size:520m26m

Author

IPACS Forum ID ApfelFlieger
Contributors
Created on 25/10/2019 15:08:24 BST (GMT+1)
Updates 26-Oct-2019 20:10:52 By ApfelFlieger

Download Section

FOR PERSONAL USE ONLY. CONTACT [email protected] FOR COMMERCIAL USE

Download instructions for a fully modelled airport follow Click for basic TSC

  1. Create folder My PC > Documents > Aerofly FS2 > scenery > places > GB
  2. Download EGEY.zip file to your GB folder and unzip to folder EGEY/
  3. Download xref_lib_water_towers.zip to My PC > Documents > Aerofly FS2 > scenery > xref and unzip to folder xref_lib_water_towers/ (only do this once and it applies for all FSCP airports
  4. Go Fly!
Back to