Twin Oaks Airport (7S3)

Description

Twin Oaks Airpark (7S3) is a Privately Owned airport that is open to the public. Twin Oaks provides: Hangar Rental, Aircraft Maintenance, Flight Training, Aircraft Rental and Aviation Fuel. Located 7 nautical miles south of the Hillsboro Airport. Twin Oaks has 1 runway 2500ft X 48ft that is lit via pilot controlled lighting. Touch and Goes are strongly discouraged. If you cannot land in the first 1/3 of the runway please go around. As always safety of flight should take precedence. A 1200ft MSL (1000ft Above Ground Level) Left traffic is standard at Twin Oaks. -Calm Wind – Takeoff runway 20 and land on runway 02 -Southerly Wind – Takeoff runway 20 land runway 20 – Northerly Wind – Takeoff runway 02 land runway 02 The above description has been prepared by IPACS forum user JetJockey10. Although this website is moderated as far as is possible, the text above does not represent the views of the administrator of FSCloudPort. If you have any concerns about the above content please email admin@

Runways

2 / 20756m x 17mModel size:760m19m

Author

IPACS Forum ID JetJockey10
Contributors
Created on 12/03/2019 20:09:58 GMT

Download Section

FOR PERSONAL USE ONLY. CONTACT [email protected] FOR COMMERCIAL USE

Download instructions for a fully modelled airport follow Click for basic TSC

  1. Create folder My PC > Documents > Aerofly FS2 > scenery > places > US
  2. Download 7S3.zip file to your US folder and unzip to folder 7S3/
  3. Go Fly!
Back to