Stockholm Arlanda Airport (ESSA)

Description

Stockholm Arlanda is an international airport located in the Sigtuna Municipality of Sweden, near the town of Märsta, 37 kilometres (23 mi) north[2] of Stockholm and nearly 40 kilometres (25 mi) south-east of Uppsala. The airport is located within Stockholm County and the province of Uppland. It is the largest airport in Sweden and the third-largest airport in the Nordic countries. The airport is the major gateway to international air travel for large parts of Sweden. Arlanda Airport was used by close to 27 million passengers in 2017, with 21.2 million international passengers and 5.5 million domestic. Stockholm Arlanda Airport is the larger of Stockholm's two airports. The other, Stockholm–Bromma, is located north-west of the city's centre, but can only be used by a small number of smaller aircraft. The smaller airports in Nyköping and Västerås are both located around 100 kilometres (60 mi) away from the Swedish capital. Stockholm Arlanda serves as a major hub for Scandinavian Airlines, NextJet and Norwegian Air Shuttle. Runways - Arlanda has three runways: Runway 1 (01L/19R), Runway 2 (08/26) and Runway 3 (01R/19L). Runway 1 is 3,301 m (10,830 ft)[8] long and can handle take-offs and landings of the heaviest aircraft in use today. Runways 2 and 3 are 2,500 m (8,202 ft) long. As indicated, runways 1 and 3 are parallel runways that can be operated independently of one another. Runways 1 and 3 are equipped with CAT III systems for instrument landings. The airport can handle simultaneous take offs and landings using runways 1 and 3 at the same time. Simultaneous aircraft takeoffs and landings can be performed in Instrument meteorological conditions, (IMC). Runway 3 (01R/19L) is reached from the main terminal area via taxiway bridges constructed to be able to handle the heaviest and largest airplanes in traffic. Since runway 3 (01R/19L) is located at a distance from the terminals a deicing area is placed close to the runway to avoid too long time between deicing and take off in winter conditions. Another deicing area is located in connection with the southern ramp area close to take off positions at runway 01L. There are high speed taxiway exits from all runways, except runway 08, to enable aircraft to exit the runways quickly after landing. This increases runway capacity during rush hours. Use of parallel taxiways around the terminal area separates arriving and departing traffic. Arlanda can handle all aircraft types in service including the Airbus A380. The above description has been prepared by IPACS forum user JetJockey10. Although this website is moderated as far as is possible, the text above does not represent the views of the administrator of FSCloudPort. If you have any concerns about the above content please email admin@

Runways

01L / 19R3285m x 45mModel size:3290m47m
08 / 262483m x 46mModel size:2484m54m
10R / 19L2486m x 46mModel size:2538m54m

Author

IPACS Forum ID JetJockey10
Contributors
Created on 12/03/2019 20:09:54 GMT
Updates more01-Apr-2018 04:49:21 By JetJockey10 +2 buildings

Download Section

FOR PERSONAL USE ONLY. CONTACT [email protected] FOR COMMERCIAL USE

Download instructions for a fully modelled airport follow Click for basic TSC

  1. Create folder My PC > Documents > Aerofly FS2 > scenery > places > SE
  2. Download ESSA.zip file to your SE folder and unzip to folder ESSA/
  3. Download xref_lib_water_towers.zip to My PC > Documents > Aerofly FS2 > scenery > xref and unzip to folder xref_lib_water_towers/ (only do this once and it applies for all FSCP airports
  4. Go Fly!
Back to